Diy Open 'canadian' Style Canoe - Full Kit Marine Ply & Epoxy Etc.

WE HAVE HAD TO OPEN A NEW classifieds board PAGE AS WE ARE NOT ALLOWED TO SELL OUR COMPANIES PRODUCTS ON OUR PERSONAL PAGE ANYMORE. PLEASE LOOK ON "JAMESDUMPSTER" FOR FEEDBACK ON ITEMS WE SELL... DIY Open "Canadian" Style Canoe. Loa 12’ – 5” (3.8m) Beam 3’ – 1/4” (0.92m) Weight (approx.) 70.55lbs (32kgs) Max. Load (approx.) 352lbs (180kgs) Crew 2/3 This kit contains everything needed to build your very own, open “Canadian” style canoe, with built in buoyancy that are fitted with small waterproof hatches for storage of valuables etc. While on the water.

The kit consists of 6mm marine plywood panels, precision cut from our CNC routing machine, to give you a lightweight canoe. The Canoe is then built using the "Stitch & Tape" method of construction. The pieces of ply are pre-drilled with small holes in each hull part and assembled by "stitching" it all together with plastic cable ties. Once all the stitches are tight, the hull is aligned and checked before wood glue is applied to the inside seams. Then the hull is turned over and the outer seams are sanded, taped and saturated with epoxy.

The bulkheads are then glued into place and the trim is fitted along the top strip of the deck. The inside is then prepared and coated in epoxy and the waterproof hatches are fitted into their holes. The outside of the hull is then prepared and painted (if you want). Your Canoe is now ready for water !!! The build should take around 5 days to complete (though it can be completed much quicker if wanted).

A PDF detailed manual is also provided, to guide you step by step through the process. Price £299. Collection from Meriden, near Coventry, if wanted. Happy Sailing... Part List: 20 x Marine Plywood 6mm Panels 8 x Pine Gunwhale Strip 1 x Gorilla Wood Glue 532ml 200 x Wurth Wood Screws 250 x Cable Ties 1 x 1Lt Epoxy Resin 1 x 300ml Epoxy Hardener 1 x 25m Fibreglass Tape 2 x Hatch Covers 2 x Stainless Steel Deck Eye Plates 1 x Sanding Block 4 x Paintbrush 3 x Pairs of Latex Gloves Note: Being a canoe, these boats do not need to be certified under the European Recreational Craft Directive. However, they would be Category D, SHELTERED WATERS: Designed for use on sheltered coastal waters, small bays, small lakes, rivers and canals when conditions up to and including wind force 4 and significant wave heights up to and including 0.3m may be experienced, with occasional waves of 0.5m maximum height, for example from passing vessels.