The Peasemarsh 12 Canadian Style Open Canoe - Plywood Only Kit

The Peasemarsh 12 Plywood Only Kit Loa 12’ – 6” (3.81m) Beam 2’ – 9” (0.84m) Weight (apprx.) 45lbs (20kgs) Max. Load (apprx.) 400lbs (181kgs) Height at Bow/Stern 19"/19" (0.48m/0.48m) Height amidships 12" (0.30m) Crew 2 This canoe is ideal for a solo paddle but will also take 2 adults and some gear for day trip or weekend camp etc or perhaps a day on the water for the kids. It is lightweight and easy carry to the water or around locks etc.This is the plywood only pack for the DIY build of an open “Canadian” style canoe.Optional built in buoyancy fore and aft that can be fitted with small hatches for storage of valuables etc while on the water. The canoe takes 4" (102mm) round plastic hatches but the holes are not cut in the bulkheads for the plywood only kit. If you want them cut, please ask when ordering.

There's no extra charge to have them cut and we add a couple of backing pads too. However, these bulkheads can be omitted from the build if you prefer. Although this canoe can be built in either 4mm or 6mm plywood but the kit is supplied in 5 or 6mm marine plywood. The kit is built using the "Stitch & Tape" method of construction. All you need to do is join the planks and bottom panel using a simple "scarfing" method we use in most of our designs and assemble by "stitching" it all together with the plastic cable ties.

(The planks can be just stitched together during assembly and joined (scarfed) in position during the gluing process). Once all the stitches are tight, the hull is aligned and checked before thickened epoxy fillet (not supplied, see our full kit) is applied to the inside seams (plank joints). Then the hull is turned over and the outer seams are taped and saturated with epoxy. Once that job is completed the hull is turned back upright, the bulkheads are glued into place and the trim is fitted along with the fore and aft decks. The inside is then prepared and painted/varnished and the hatches are fitted in their holes.

Now the outside of the hull can be prepared and painted or varnished. Once all the painting is done, make or buy a paddle and you're ready for launching. (We can supply paddles, a yoke, seats etc - details supplied with kit). The build takes around 4 or 5 days to complete but has been done in less using fast epoxy. Once complete, you have a brand new canoe for less than the cost of even a cheap, mass produced plastic one and you will have built it!

We also run canoe building courses where you build your canoe with us over 3 or 5 days. E-brochure (pdf) available for classifieds board sales or if you have any questions See "Business Seller Information" at bottom of page for contact details. Plywood Only Kit - £255.00 delivered to you via courier (TNT)Delivery is included in the price for these kits for UK Mainland Only (Highlands, Islands & N.I. Please contact us for delivery surcharge for these areas) or you can arrange to collect from us. This Plywood Only Kit consists of all the plank sections cut out including bottom panel, stitch holes drilled, bulkheads and ply for decks ready for assembly.

The epoxy pack is not included in this kit. See our other items for the Full Kit. Collection possible from Corby or Stevenage. Delivery time for Kits is normally 3 - 6 working days from receiving payment (we will confirm with order or contact us). All our kits are normally cut to order on next working day after receipt of payment and despatched the following day (3 days to deliver).

However, if we have no plywood in stock, it will take a little longer (up to 6 days to deliver).Note! There are no external links with the brochure and you will have to return to classifieds board to buy. There is also a complete kit option which includes the epoxy (Check out my other items!) To see more pictures of our other boats, use link below http://stanleysmallcraft.webeden.co.uk/ (Please Note!! You cannot buy from this site. Please return to classifieds board) Note: Being a canoe, these boats do not need to be certified under the European Recreational Craft Directive.

However, they would be Category D, SHELTERED WATERS: Designed for use on sheltered coastal waters, small bays, small lakes, rivers and canals when conditions up to and including wind force 4 and significant wave heights up to and including 0.3m may be experienced, with occasional waves of 0.5m maximum height, for example from passing vessels. STANLEY SmallCraft is a business seller and we sell some of our other design kits and plans on classifieds board too so please check out our Check out our other items!! (Sorry, classifieds board rules prevent us from listing our website address). .