Dengemarsh 12 Open Canoe Diy Build Plans With Full Size Patterns

Length 12' - 6" (3.81m)Beam 2' - 9" (0.84m)Depth (midships) 1' - 0.5" (0.32m)Height fwd/aft 1' - 7.5" (0.49m)Weight (approx.) 44lbs (20kgs)Crew 2 Adults These plans are previously printed as stock for a show or other promotion. They are in as good condition as we would normally send out but have been stored for some time so, we are selling them a little cheaper than normal but they still come with our full, free after sales build help & advice service. This canoe has built in buoyancy fore and aft that can be fitted with small hatches for storage of valuables etc.Can be built in either 4mm or 6mm plywood (though 6mm recommended) and requires between 30 and 40 hours to complete or two long weekends.This canoe is ideal for a solo paddle but will also take 2 adults and some gear for day trip or weekend camp etc or perhaps a day on the water for the kids.It goes together easily and quite quickly. Once completed, it looks good and performs well on the water too.Designed to be paddled while kneeling but seats could be fitted.The build is based on at least 3 sheets of 6mm Plywood (Good exterior grade or better), two 3.5m or 4m lengths of 20mm x 20mm square timber, 1 x 20mm x 40mm x 1m timber (all soft or hardwood), 4.5kg/ltr Epoxy Pack plus additive and Fibreglass Tape. The first four pictures show this canoe built by a build by a charity workshop.

Basic Materials Required 3 x 6mm x 2.44m x 1.22m, 4.5kg Epoxy pack, 2.5ltr Fillet Additive,35m x 100mm wide F/G Tape, 100 4.8mm x 300mm Cable Ties.