Gunga Din 2 - Canadian Style Kayak/boat/canoe - Plywood Kit. 3.8m [12' 6"] Long

**** Currently cutting 10-off kits for delivery within about 1 week ***** Price INCLUDES Mainland UK delivery. Canadian style 2-seat flat-bottom plywood self-build canoe PLYWOOD KIT.. Condition is New. Affectionately known as "GUNGA DIN II" once built this canoe is approximately 3.8 m [12 foot 6 inches] long. If you need a shorter and lighter canoe then please look at "GUNGA DIN 3" With a low build cost this is a cost effective way to get onto the water. You receive a full set of PRE-CUT 6 mm thick plywood pieces fully labelled to aid building.

Included in the packaging is some batten than can be reused as seat supports to save waste and cost. You may need to lightly sand the edges prior to assembly due to the manufacturing process. No other items that may be seen in the images are included. Assemble the canoe kit using cable ties and glue. Finish with glass fibre tape and epoxy resin.

The hull is fully epoxy coated for waterproofing and can be left as a natural finish or painted. Minimal skills needed and can be assembled in about 20 hours not including curing time. To build this canoe you will need [all listed in the manual supplied]: 2 kg of epoxy pack + additive.Fiber glass tape - a 50m roll x 50mm or 75mm wide is enough.Gorilla Glue or Soudal Pro 45P - about 250ml will do but buy a 500mml bottle to be safe.Some timber for gunwals and hidden seat support - about 8 lengths of 15mm x 30mm x 2000mm lengths will do.Approximately 250 cable ties.Some screws.Additional build items:Water resistant HATCH - purchased from classifieds board and link shared in the manualTie-up eyelets [recommended].NOTE: if you don't want to fit the hatches then please message me and I will omit the hole during preparation. This listing is for a set of pre-cut PLYWOOD pieces and includes printed assembly instructions, and a list of parts required to complete the build. This version of the canoe includes apertures for water proof HATCHES which can be purchased on classifieds board or the ship-builder can leave these out [advise me after purchase].

Assembly instructions can be electronically sent once a purchase has been made should you need a copy. Instructions in printed version included in the kit as well as a recommended supplier list. We are available to the builder for after sales email support. Any issues then please contact us before leaving feedback. Dispatched using a freight courier and may take 1 week to dispatch and another 1 week to arrive.

Transport cost includes insurance. Delivery outside mainland UK not possible without prior arrangement - please message me for islands and highlands. Delivered in a wrapped package and is approximately 19 Kg so help may be need to handle once delivered. IF YOU WANT A CHEAPER OPTION THEN PLEASE LOOK AT MY LISTING FOR THE PLANS-ONLY.